Cleanroom Cleaning and Disinfection with Quantumtec Disinfectants

Cleanroom Cleaning and Disinfection with Quantumtec Disinfectants

2. Developing a Standard Operating Procedure (SOP) for Cleaning and Disinfection in Clean Areas

• Contamination Risk Assessment: It is essential to identify potential sources of contamination from the air, personnel, and equipment to develop an appropriate procedure.
• Cleaning Frequency: Depending on the area and equipment, the SOP should clearly specify the cleaning frequency—daily, weekly, or monthly.
• Selection of Disinfectants: It is necessary to choose suitable disinfectants that do not damage equipment while ensuring effective microbial kill.
• Staff Training: Employees must receive thorough training on cleaning procedures, the use of disinfectants, and the proper use of safety protective equipment.
• Documentation and Control: All cleaning and disinfection activities must be thoroughly documented for easy retrieval and quality control.

3. Common Disinfectants: 

Here are some commonly used disinfectants:

• Sodium Hypochlorite (Bleach): A powerful disinfectant with the ability to kill a wide range of microorganisms, widely used in both healthcare and pharmaceuticals.
• Hydrogen Peroxide (H2O2): A strong oxidizing agent that effectively kills bacteria, viruses, and fungi without leaving harmful residues.
• Alcohol (Ethanol, Isopropanol): Alcohol is commonly used for cleaning surfaces and hands, providing rapid disinfection but is ineffective against bacterial spores.
• Quaternary Ammonium Compounds (QACs): This group of disinfectants acts quickly and is widely used in cleanroom surface cleaning procedures.

4. Factors Affecting Disinfection Effectiveness

To achieve the highest disinfection effectiveness, the following factors must be considered and controlled:

• Chemical Concentration: Prepare the disinfectant at the correct concentration to ensure effective microbial kill. Concentrations that are too low will be insufficient for disinfection, while concentrations that are too high may damage equipment and pose risks to human health.
• Contact Time: The disinfectant needs to have adequate contact time with the surface to completely eliminate bacteria and viruses.
• Temperature and Humidity: The effectiveness of disinfectants can be influenced by the temperature and humidity levels in the cleanroom. It is essential to maintain appropriate environmental conditions for the disinfection process.
• Surface Type: Smooth, non-porous surfaces are generally easier to disinfect compared to porous or rough surfaces.
• Type of Microorganism: Some bacteria or viruses may be resistant to certain disinfectants; therefore, it may be necessary to select and combine multiple disinfection methods when needed.

QUANTUMTEC CHEMICAL BRAND – THE OPTIMAL COST-SAVING SOLUTION FOR FACTORIES

1. Disinfectant Chemicals

QT 70 ISOPROPYL ALCOHOL (QT 70 IPA)

QT 70% SPECIALLY DENATURED ETHANOL (QT 70 SDA)

QT QUATERNARY AMMONIUM (QT QUAT)

QT SPORICIDE

QT BAC-T-CLEAR ALCOHOL FREE HAND SANITISER

2. Disinfectant and Cleaning Chemicals

QT 70 ISOPROPYL ALCOHOL (QT 70 IPA)

QT 70% SPECIALLY DENATURED ETHANOL (QT 70 SDA)

QT PEROXY PURE

QT CHLORITE

QT QUATERNARY AMMONIUM (QT QUAT)

QT SPORICIDE

QT CONCENTRATED DETERGENT

QT CIP

3. Hand Sanitiser

QT BAC-T-CLEAR ALCOHOL FREE HAND SANITISER

4. Fungicidal Chemicals

QT QUATERNARY AMMONIUM

QT SPORICIDE

5. Pre-Saturated Wipes

QT PER-SATURATED  CP WIPES

6. Water for Injection 

QT WATER FOR INJECTION

———————————

For more detailed information and to order QuantumTEC products, please contact Sepro

  For more QuantumTec products, click here

Sepro is always at your service to provide support and guidance, ensuring that you find the most suitable products for your needs

Contact Sepro

• Since its founding in 2010, Sepro has been a trusted and reputable brand for over a decade.
• As of 2023, Sepro is the official distributor of PMA QuantumTec in the Vietnamese market.
• Sepro is committed to providing high-quality products that meet strict cleanroom and disinfection standards, ensuring cleanliness and absolute safety in controlled environments like pharmaceutical and electronics factories.
• Sepro aims to build long-term partnerships, offering not just supplies but also trusted collaborations to maintain product quality in cleanroom and disinfection applications.

 For product support, contact us:

 Hotline: (84) 96 825 5675 (Ms Mi)

 Address: 2nd Foor, The Peak – M8, Midtown Phu My Hung, Tan Phu, D7, HCMC, Vietnam

  Join us on our Fanpage to ensure you don’t miss any important information! 

–

–

>>> Top choices for 30% Hydrogen Peroxide in Vietnam